The AS121CL-3 Industrial Low-Scan LCD monitor has been designed as
replacement for 14” CRT monitors now that supplies of 14” CRTs are difficult to obtain.
AbraxSys has designed a rugged LCD monitor module, of minimum
width, to match the dimensions of many 14” CRT monitor chassis. When the CRT is removed from the existing chassis
metalwork the LCD monitor (mounted
on a metal panel with fixing holes to match the CRT Lugs ) can be fitted in place.
A wide range of signal timings from 15kHz up to SVGA standard,
including CGA & EGA legacy signals can be accepted by the LCD monitor. Set-up controls for finetuning of the
display are located at the rear of the monitor. Once set, no further adjustments should be required, and the last
setting is stored in memory.