Model PM-121 is a Second Generation model and is a high-quality industrial LCD system offering NEMA 4 (IP65)
level protection at the front bezel. The product boasts a 12" display size with 1024 x 768 pixels, 500 NITS
brightness (long-life LED backlight) and 700:1 contrast ratio. The unit is constructed a black powder-coated
gasket-sealed front bezel with "bolt" mounting.
This rugged model offers exceptional shock and vibration safeguards and its front bezel and rear housing are
constructed of high grade aluminum which has been dipped in zinc-chromate and then finished with a resilient
corrosive resistant thermal-set black powder-coating.
This product is very ruggedly built, features long-life displays with no scheduled End Of Life. Incorporating the
latest LCD and control electronics you are assured a display the will perform reliably in harsh industrial
Many configurations available, including our Sun Readable SRD
13.13" (335.50mm) x 11.08" (281.43mm) x 1.99"
Panel Cutout H/W
10.5” (266.7mm) x 12.5” (317.5mm)
NEMA 4 (IP65)
Operating Temperature Range
-30° to 70°C (-22°F to 158°F)
-40° to 85° (-40°F to 185°F)
Vibration-proof, self-locking, fastener system which will
not loosen regardless of seat torque. Designed to help make products safer, lower warranty
costs and prolong equipment life by eliminating vibration; increased safety, reliability, operating
life and reduced maintenance.
Operating 0 to 10,000 ft. / Storage0 to 40,000 ft.
Operating: 30g’s, 11ms, ½ Sine
Non-Operating: 200G, 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Operating: 1g RMS 20-500Hz
Non-Operating: 1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z
FCC Class B pursuant to Part 15 of the FCC Rules
5% to 95% RH (non-condensing)
Approximately 35 watts [Configuration Dependent], Current