Model PS-121 is a high-quality industrial LCD system offering NEMA 4X (IP66) level protection at the front
bezel. The product boasts a 12.1" display size with 1024 x 768 pixels, 500 nits brightness (long-life
LED backlight) and 700:1 contrast ratio.
The unit is constructed of a stainless steel gasket-sealed front bezel
with "bolt" mounting and its rear housing is constructed of 6061 grade aluminum which has been dipped in
zinc-chromate and then finished with a resilient corrosive resistant thermal-set black powder-coating.
This product is very ruggedly built, features long-life displays with no scheduled End Of Life. Incorporating the
latest LCD, light emitting diodes (LED) backlighting, and control electronics you are assured a display the
will perform reliably in harsh industrial environments.
Many configurations available, including our Sunlight Readable LCD
AbraxySys Industrial Waterproof LCD Flat Panel Displays
are ideally suited for various harsh environments where dust, dirt, moisture, splashing water, hose directed spray,
and various other caustic contaminants like oil, chemicals, etc. are commonly present.
13.13" (335.50mm) x 11.08" (281.43mm) x 1.99"
Panel Cutout H/W
10.5” (266.7mm) x 12.5” (317.5mm)
NEMA 4X (IP66)
Operating Temperature Range
-30° to 70°C (-22°F to 158°F)
-40° to 85° (-40°F to 185°F)
Vibration-proof, self-locking, fastener system which will
not loosen regardless of seat torque. Designed to help make products safer, lower warranty
costs and prolong equipment life by eliminating vibration; increased safety, reliability, operating
life and reduced maintenance.
Operating 0 to 10,000 ft. / Storage0 to 40,000 ft.
Operating: 30g’s, 11ms, ½ Sine
Non-Operating: 200G, 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Operating: 1g RMS 20-500Hz
Non-Operating: 1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z
FCC Class B pursuant to Part 15 of the FCC Rules
5% to 95% RH (non-condensing)
Approximately 35 watts [Configuration Dependent], Current