The AS121TL Industrial LCD low-scan monitor have been designed as
replacements for 12” CRT monitors now that supplies of 12” CRTs are difficult to obtain. Ease of integration
into a wide range of Measurement, Instrumentation and Human-Machine interface applications has been a key
AbraxSys has designed a rugged LCD monitor module, of minimum width, to match the
dimensions of its 12” CRT monitor chassis. The monitor is housed in a rugged metal case with rear fixing points.
The LCD module is ventilated for best reliability when mounted within the OEM enclosure. EMC considerations include
the use of a metal shield over the front of the LCD panel. Toughened, non-glare safety glass protects the
The A/D board has been designed to accept a wide range of signal timings from 15kHz up
to SVGA standard, including CGA & EGA legacy signals. Set-up controls for fine-tuning of the display are
located at the rear of the monitor. Once set, no further adjustments should be required, and the last setting is
stored in memory.
Active Matrix TFT LCD
400 nits (cd/m2)
15 to 60 kHz (Horizontal), 40 to 100 Hz
800 x 600 SVGA, CGA & EGA + pre-programmed timings in 15-30kHz range
Separate H&V (+/-ve) TTL or Composite (-ve) TTL or Sync-on-Green (-ve) 0.3V