26" Industrial Low-Scan LCD Open-Frame Chassis Mount Flat Panel Display for Legacy Video
Formats
Model
AS261CL
The AS261CL-1 is a 26” LCD monitor and has been designed primarily for Slow Scan Legacy Systems
as replacements for 28” CRT monitors. They utilise modern WXGA TFT panels and an AbraxSys designed
Analog-Digital interface board. All elements, including a toughened glass protection screen, have been
packaged in a rugged metal housing. The AC power supply is integrated in themonitor head.
Public Information and Process Control systems may be able to use the full width of this 16:9 screen. If 4:3 aspect ratio
information isdisplayed the
picture will be the same size as on a 21.3” LCD monitor. High brightness and exceptional viewing angles make
this 26” a unique solution to many CRT Replacement problems. Some common Slow Scan Signal timings are factory
pre-set. New ones may be added on request. Other signals, which are close to those listed (see table below),
will give a display but some adjustment may be necessary for full screen performance.
PRODUCT SPECIFICATIONS
Display Size
26.1"
Display Type
Long-Life Industrial Grade LCD
Brightness
500 nits (cd/m2)
Contrast Ratio
800:1
Aspect Ratio
16:9
Horizontal Scan Frequency
15 to 91 kHz
Resolution
CGA, EGA, up to 1366 x 768 (WXGA)
Colors Suported
16.7 million
Viewing Angles
85° up 85° down, 85° left 85° right
Video Inputs
HD-15 (VGA), 5x BNC (sync-on-green), D9
Power Types
Choices: 90 VAC to 264 VAC; 12V DC; 24V DC; 9 to 36V DC; or 20 to 53V DC
The AS261CL-1 is a 26” LCD monitor and has been designed primarily for Slow Scan Legacy Systems
as replacements for 28” CRT monitors. They utilise modern WXGA TFT panels and an AbraxSys designed
Analog-Digital interface board. All elements, including a toughened glass protection screen, have been
packaged in a rugged metal housing. The AC power supply is integrated in the
